NOW WORKS WITH VISTA 32/64! NEC Chip Inside, this is the Best Amplified solution for Hi-Speed USB 2.0 Data Transfer up to 25ft. Away.
This Cable will Run Between Any USB 2.0 Device and a Host Computer up to 25ft. Away, Item Uses Standard A Male Port to Connect to Host Computer and Standard B Plug to Connect to any AC Powered USB Device. This Cable Amplifies All Signal So there is no Signal Loss even at 25ft. There is one Limitation, USB Device that Plugs into this Super Long USB Extension Needs to Be AC powered (Plugs into the wall, does not draw power form USB port). That is it, Need to Extand your Printer, Scanner, Digital Photo Frame, Etc. up to 25ft. Away, This item will do the trick!
SUPER Long Range USB Device Cable!
25ft. A to B Amplified Signal Cable for Windows And Mac Users
Japan Made NEC Chip Inside only From COOLGear
Product Features: - USB 2.0 specification compliant. - Data transfer rate up to 480Mbps. - True Plug and Play. - No external power require. CE and FCC Approved.
USB 2.0 Active Extension Cable by USBGear
Unlike passive extension cables, the USBG-25FTAB 2.0 Certified Active Extension Cable (using NEC HUB chip) is an active device that buffers the data going in and out to assure that signal always meets the USB 2.0 Electrical and Timing Specifications.
USBG-25FTAB can be used to extend the cable length of any USB 2.0 device. This USB active cable acts as a transparent USB 2.0 Hub Therefore there is no drivers required!
Extends and boosts the signal to any USB device supports data transfer speeds up to 480 Mbps
Built-in repeater helps maintain Hi-Speed USB 2.0 signal quality, electrical and timing specifications
Overcomes the 5 m (16 ft.) USB distance limitation ideal for connecting most USB printers
Provides a single, nondaisy-chainable extension for maximum distance of 7.5 meter (25 ft.)
Plug and Play; Windows and Mac compatible
bus-powered requires no external power supply
Power is delivered using 22AWG Wires and Signal Is boosted using HUB ASIC Chip to Full USB 2.0 High-Speed Specification over 28AWG Wires
USB 1.1 and Hi-Speed USB 2.0 compatible
A male to B male
Windows 98/Me/2000/XP/Vista and Mac Linux compatible
Cable length, 7.5 m (25 ft.); 432 g (15.2 oz)
Standard A to B Cable Ends, Plug Your Printer Scanner Whatever USB 2.0 Device you may have directly to this 25ft. long USB Booster Cable.